How Marks Are Given
Examiners mark with a scheme that lists the points they should look for. A three-mark answer usually has three such points, and a numerical gets one mark each for the formula, the substitution and the final answer with its unit. If a point isn't on the page, the examiner can't give you the mark for it, however well you understood it.
So long answers don't earn extra marks. What helps is writing so that each point is easy to spot:
- Start with what was asked: the name, the definition, the product.
- Put each point on its own line, or number it (i), (ii), (iii).
- Write reactions as equations, balanced, with the reagent and condition over the arrow.
- Draw diagrams in pencil and label every part.
- Use exactly the question number and subpart letter printed on the paper.
One-Mark Questions
Multiple choice. Write the option letter and the answer together, for example "(b) vinegar". The board's schemes accept the letter, the answer or both, so writing both is the safest. Read words like incorrect, not, major and increasing twice before choosing.
Two-statement questions. Decide true or false for Statement I first, then for Statement II, separately. Only then look at the four options.
Fill in the blanks. Six words, five blanks. Fill the sure ones, cross those words off, then deal with the rest. Watch the number words (one, two, three) in particular. Model Paper 1, for example, gave three number words for only two blanks that needed a number.
Two- and Three-Mark Answers
Two marks means two points. Usually that's one of these:
- a definition and an example
- two differences
- a reagent and what it identifies
- the name of a reaction and its equation
Three marks means three points. In Part C the answer usually takes one of these forms:
- VBT questions: the electron configuration of the metal ion and what happens when the ligands approach, then the hybridisation and geometry, then the magnetic property.
- "Complete the following equations": three equations, usually one mark each. Balance every one.
- Derivations: the rate law, the integration with the constant worked out, then the final expression.
- A definition plus two consequences or characteristics: lanthanoid contraction is the classic example.
- Cells and batteries: the anode reaction, the cathode reaction and the overall reaction, or a labelled diagram with the half-reactions.
Five-Mark Answers
Look at the split printed at the end of the question, such as (3+2) or (2+2+1). It tells you how much to write for each part. A 1-mark part needs a word or a line. A 3-mark part needs a full equation or mechanism.
For organic answers:
- Write the reagent and condition over the arrow: dry acetone, Pd–BaSO, NaNO + HCl at 273–278 K, conc. HSO at 443 K.
- For a mechanism, number the steps and show the intermediate formed in each one.
- For an "identify A, B and C" chain, give the name and structure of each compound and the equation for each step.
- Answer every subpart, including the 1-mark one at the end. It is the quickest mark in the question and the one most often left blank.
Numericals Without a Scientific Calculator
Every Part E answer should follow the same five steps:
- Given: list the data with units, converted where needed (g to kg, mL to L, °C to K, kJ to J).
- Formula: write it before putting in any numbers.
- Substitution: put the values into the formula.
- Calculation: show the log or arithmetic steps.
- Final answer with its unit.
In the 2026 Exam-1 scheme, each numerical was marked 1 for the formula, 1 for the substitution and 1 for the answer, with a note that the correct unit is strictly expected.
Since you'll be using log tables, these values are worth knowing by heart:
| Quantity | Value |
|---|---|
| log 2 | 0.3010 |
| log 3 | 0.4771 |
| log 5 | 0.6990 |
| log 7 | 0.8451 |
| at 298 K | 0.0591 V |
| R | 8.314 J K mol |
| F | 96500 C mol |
With these, most logs in the paper reduce to simple subtraction. For example, .
Where Marks Usually Get Lost
- Writing a second answer next to the first one in Part A.
- Numbering an answer wrongly, such as writing 37 for an answer to 38.
- An equation with the right products that isn't balanced, or has no condition.
- A VBT answer that says "octahedral" but never states the hybridisation or the magnetic property.
- A numerical with no unit, or with mL or °C left unconverted.
- Answering every part of a long question except the last 1-mark part.
- Spending 20 minutes on a 2-mark question you only half know.
Solved Examples From Real Papers
Question 1 (1 mark, 2027 Model Paper 1): Statement 1: If on mixing two liquids the solution becomes hot, it shows negative deviation from Raoult's law. Statement 2: Solutions which show negative deviation are accompanied by a decrease in volume.
(a) Both statements are true (b) Statement 1 is true but Statement 2 is false (c) Both statements are false (d) Statement 1 is false but Statement 2 is true
Answer. (a) Both statements are true. The solution getting hot means heat is given out, so the A–B attractions are stronger than A–A and B–B. That is negative deviation, so Statement 1 is true. Stronger attractions pull the molecules closer, so the volume goes down. Statement 2 is true as well.
Question 2 (5 marks, 2027 Model Paper 1): Fill in the blanks using the words given: two, EDTA, chloroform, three, nucleotide, one.
- The polyhalogen compound used as an anaesthetic during surgery was __.
- Nucleic acids are long chain polymers of __.
- The van't Hoff factor for KCl solution, assuming complete dissociation, is __.
- The number of hydroxyl groups in glycerol is __.
- An example of a polydentate ligand is __.
Answer. 16: chloroform. 17: nucleotides. 18: two. 19: three. 20: EDTA. The word "one" is left over. Notice that the bank had three number words, but only two blanks needed a number. KCl splits into K and Cl, so . Glycerol is propane-1,2,3-triol, so it has three OH groups.
Question 3 (2 marks, 2027 Model Paper 1 and 2026 Exam-2): What is Lucas reagent? Which class of alcohol produces turbidity immediately with it?
Answer.
- Lucas reagent is a mixture of concentrated HCl and anhydrous ZnCl.
- Tertiary alcohols give turbidity immediately. They form a stable tertiary carbocation quickly, and the alkyl chloride formed doesn't dissolve, so the solution turns cloudy.
One mark for each point.
Question 4 (3 marks, Part C group IV, 2026 Exam-1 and 2027 Model Paper 3): Using valence bond theory, account for the hybridisation, geometry and magnetic property of [Co(NH)]. (Atomic number of Co = 27)
Answer.
- Co is [Ar] 3d 4s, so Co is [Ar] 3d.
- NH is a strong field ligand. It makes the six 3d electrons pair up in three 3d orbitals, so two 3d orbitals are left empty.
- The two empty 3d orbitals, the 4s orbital and the three 4p orbitals mix to give six dsp hybrid orbitals. Each one takes a lone pair from an NH molecule.
- Hybridisation: dsp (inner orbital complex)
- Geometry: octahedral
- Magnetic property: no unpaired electrons, so it is diamagnetic
In the 2026 Exam-1 scheme this question gave 1 mark for the explanation, 1 for the geometry and 1 for the magnetic property. Drawing the orbital boxes for Co before and after pairing makes the explanation mark easy to give.
Question 5 (3 marks, Part C group V, 2025 Exam-3, 2026 Exam-1 and 2027 Model Paper 4): Derive the integrated rate equation for the rate constant of a first order reaction.
Answer. For a first order reaction R → P:
Separating the variables:
Integrating both sides:
At , , so . Putting this back:
Each of the three marks has its own step on the page: the rate law, the integration with the constant worked out, and the final form.
Question 6 (5 marks, Part D, 2026 Exam-1 and 2027 Model Paper 1): (a) When an alkyl chloride reacts with sodium iodide in dry acetone, it gives an alkyl iodide. (i) Name this reaction. (ii) Write the general equation. (iii) Mention the role of dry acetone. (b) What is meant by racemic modification? "They are optically inactive." Give reason. (3+2)
Answer.
(a) (i) Finkelstein reaction.
(ii) (X = Cl or Br)
(iii) The NaCl or NaBr formed doesn't dissolve in dry acetone, so it comes out as a solid. Taking it out of the solution pushes the reaction forward.
(b) A racemic modification is a mixture that has the two enantiomers (d and l) in equal amounts. It is optically inactive because the rotation caused by one enantiomer is cancelled by the equal and opposite rotation of the other.
Each of the five marks has its own line here: the name, the equation, the role of acetone, the definition and the reason.
Question 7 (3 marks, Part E, 2026 Exam-1): A first order reaction takes 40 min for 30% decomposition. Calculate the half-life.
Answer.
Given: t = 40 min. After 30% decomposes, 70% is left. Taking , we get .
Formula: and
Substitution:
Calculation:
Final answer: the half-life is 77.7 min.
Question 8 (3 marks, Part E, 2027 Model Paper 4): The time needed to decompose SOCl to half its initial amount is 60 minutes. If the decomposition is first order, calculate the rate constant.
Answer.
Formula: for a first order reaction, , so
Substitution:
Final answer: , which is the same as .
Either unit is accepted, as long as it is written.