The bridge sentence

Before you look at the options, join the first two words in one short sentence. For Kiln : Brick you might say "A kiln is where bricks are baked." Now put the third word into the same sentence and see which option completes it. If two options both fit, the sentence is too loose. Add one more detail, such as the purpose, the place or the order, until only one option is left. Six to ten words are usually enough for a good bridge.

Relation families: people, tools and measures

Many word analogies use one of a few links between people and things. Learn to name the link in two or three words:

  • worker and tool: Mason : Trowel
  • worker and product: Choreographer : Dance
  • worker and workplace: Librarian : Library
  • instrument and what it measures: Lactometer : Density of milk
  • unit and quantity: Coulomb : Charge
  • field of study and its subject: Virology : Viruses

Once the link has a name, most wrong options drop out because they belong to another family.

Relation families: meaning, nature and facts

The second group is about meaning and the natural world:

  • same or opposite meaning: Feeble : Weak, Feeble : Strong
  • a much stronger form: Glad : Overjoyed
  • part and whole: Spoke : Wheel
  • material and product: Jute : Sack
  • young one and adult: Leveret : Hare
  • one and its group: Flower : Bouquet
  • cause and effect: Virus : Infection
  • fact pairs: Kenya : Shilling, Garba : Gujarat

Fact pairs need knowledge, not logic, so keep a notebook list of currencies, capitals, dances, musicians and trophies.

Word-pair order

In word-pair questions the link can be right while the direction is wrong. Seed : Sapling and Sapling : Seed share the same link, but only one of them runs from earlier to later. So find the relation first and check the order as a separate step. A correct relation written in reverse is a favourite wrong option, because it catches anyone reading fast. Say your bridge sentence with the first word as the subject every time.

[SSC Tip] If two options look equally right, compare their order with the given pair. Usually only one of them matches.

Alphabet positions, EJOTY and opposite pairs

Write A1 to Z26 on the rough sheet until the positions come without thinking. EJOTY marks the multiples of five: E 5, J 10, O 15, T 20, Y 25. Apart from A and B, every letter is at most two steps from one of them, so K is J + 1 = 11 and W is Y − 2 = 23.

Opposite letters always add up to 27: AZ, BY, CX, DW, EV, FU, GT, HS, IR, JQ, KP, LO, MN. The reverse position of a letter (Z = 1) is 27 minus its normal position.

Shift habits and wrap-around

Write the move under every letter as a signed number, like +2 or −3. Then read the row of moves. It may be the same all through, it may grow (+1, +2, +3, +4), or it may alternate (+3, −2, +3, −2).

Past Z, carry on from A, so Y + 4 = C. Before A, carry on from Z, so B − 3 = Y. With numbers, take away 26 when you cross Z and add 26 when you cross A. If the moves look random, reverse the word or take opposite letters and try again.

Rearrangement patterns

When the second cluster has exactly the same letters, nothing has been shifted, only moved. Number the letters of the first word 1, 2, 3 and so on, and write the second word as a list of those numbers, such as 3 2 1 6 5 4. Then apply that list to the new word.

The usual patterns are a full reverse, each half reversed, pairs swapped, halves exchanged, end letters moved to the front, and even places before odd places. Read the pattern from a word with no repeated letters.

Letter-number rules

When numbers stand for letters, test these in order: the plain position (A = 1), the reverse position (A = 26), and then the square, sum or product of the positions. A two-letter term can hide a product, as in BK : 22, because 2 × 11 = 22.

For mixed codes like KT-12, split the term. Find one rule for the letters and a separate rule for the number. Confirm both on the second pair, because a single pair can hide two different rules.

Number rules to test in order

Look at the size of the second number first. About the same size: try adding or subtracting. A few times bigger: try × 2 or × 3 with a small number added or taken away. Near a square or a cube: write that square or cube and look at the gap, as in 730 = 729 + 1. After that, try n(n + 1) and n(n − 1). Test it on every complete pair before opening the options.

[SSC Tip] Know squares up to 30 and cubes up to 20 by heart. Nothing saves more time.

The whole-number NOTE

The NOTE printed with number questions says you may add, subtract, multiply, divide, square or cube a number as a whole, but you may not split it into digits. So with 47 you may use 47 + 3 or 47 × 2, but never 4 + 7 or 4 × 7.

When the NOTE is there, drop every digit idea at once and save the time. When it is missing, digit rules are possible, but test the whole-number rules first anyway.

Sets and triads

Find the rule from the first set and confirm it on the second before you go anywhere near the options. Write the rule in a short form, such as a × b − (a + b), so that you apply it the same way to every option. Then work each option out fully instead of judging by eye, because setters like to put options that miss the rule by just one. If a rule works on one set but fails on the other, drop it and try the next.

A time plan for the 15-minute section

The Tier 1 reasoning section gives you 25 questions on its own locked 15-minute clock, about 36 seconds each. Most analogy items should come in under that: about 15 seconds for a word item, 20 to 30 for a letter item and about 30 for a number pair. Number sets take longer, so allow them 40 to 50. If no rule has appeared after about 45 seconds, mark the question and move on. Come back in the last few minutes. The rule is often easier to see then.

[SSC Tip] Do the word analogies quickly, so that you have more time for the slow puzzles later in the section.