The first move: put the word over its code

Every coding question starts the same way. Write the example word, and right under it write its code, letter under letter. Then read the columns.

  • Same letters, new places: a rearrangement. Look at where each letter went.
  • New letters, same count: a shift. Count the steps in each column.
  • Numbers: one number for each letter is a letter-number code. One number for the whole word is a word value.
  • Whole sentences: a sentence code. Look for the words the sentences share.

Before you trust a rule, test it on the second example. One example can often be read two ways. TOP → UQS could be a step that grows by one (+1, +2, +3), or three moves that repeat every three letters. For a longer target word those two readings give different answers, and the second example is there to decide between them.

Then apply the rule to the target letter by letter, and check it against the options one letter at a time. Options usually differ in one or two places only, so one column is often enough to settle the question.

Positions, EJOTY, reverse and opposite letters

Most letter codes come down to positions, so know them without counting. A is 1 and Z is 26. EJOTY gives five landmarks: E 5, J 10, O 15, T 20, Y 25. Count a step or two from the nearest one. W is three after T, so it is 23. R is two before T, so it is 18.

The reverse position counts from Z instead: Z is 1, Y is 2, and A is 26. It is always 27 minus the usual position. K is 11, so its reverse position is 16.

Opposite letters are the pairs that add up to 27:

Letter A B C D E F G H I J K L M
Opposite Z Y X W V U T S R Q P O N

When a code swaps every letter for its opposite, the sums give it away: T and G make 20 + 7 = 27, and so do W and D.

The wrap matters in every shift. Going forward past Z, take away 26: X + 5 is 24 + 5 = 29, and 29 − 26 = 3, which is C. Going back past A, add 26: C − 5 is 3 − 5 = −2, and −2 + 26 = 24, which is X.

Shifts: same, growing, taking turns, vowels apart

Once the word sits over its code, write the step under each column with its sign. The row of steps tells you the family.

  • Same shift: every column moves the same amount, such as +3 or −2.
  • Growing shift: +1, +2, +3 … or −1, −2, −3 …, one more for each letter. The last letters of a long word often run past Z.
  • Taking turns: two amounts alternate, such as +2, −1, +2, −1. Mark the odd and even places and give each its own move.
  • Vowels apart: if the steps look random, underline the vowels. Often every vowel moves one way and every consonant another, for example vowels +2 and consonants −1. Only A, E, I, O and U count as vowels.

For a growing or alternating rule, carry the pattern on for as many letters as the target has: a growing shift keeps growing, and two moves keep taking turns. If the target is longer than both examples, make sure the pattern is plain from them, for example that the moves really grow by one and do not just repeat, before you extend it.

[SSC Tip] Work out only the first two or three letters of the target, then look at the options. Very often just one still fits.

Rearrangement codes

In a rearrangement, the code holds exactly the same letters as the word, only in new places. Write 1, 2, 3 … under the word and see where each letter went. These are the shapes to know:

  • Whole word reversed: TOWN → NWOT
  • Each half reversed: ZIPPER splits into ZIP and PER, giving PIZREP
  • Pairs swapped: TREK → RTKE, with the last letter left alone if the word is odd in length
  • First and last letters swapped: TUBA → AUBT
  • All but the last letter reversed: TRUMPET → EPMURTT
  • Letters in alphabetical order: WAVE → AEVW

With an odd number of letters, watch the middle one. In a half-reversal it usually stays put.

Two quick checks clear wrong options fast. An option with a letter that is not in the word cannot be right. An option that keeps the right letters but drops a repeated one, or repeats one too often, is out as well.

Two-step codes

Some codes do two things to a word. The usual pairs are a rearrangement and a shift together, opposite letters and a reversal together, or letters and numbers mixed in one code.

You can tell a two-step code from the columns. If the code has new letters but the steps under the columns look random, try reversing the word first and compare again. Suppose WIND is coded as EOJX. Against WIND the steps make no sense. Against DNIW, the word reversed, every column is +1. So the rule is reverse, then shift +1. Swapping pairs works the same way: swap first, then read the steps.

In a mixed code, some letters turn into numbers and others into letters. Sort the example into vowels and consonants and see what happened to each group. One group may become positions while the other shifts.

For a reversal and a shift of the same size for every letter, the order of the two steps does not change the result, so do whichever is quicker. With opposite letters and a shift, or a growing shift, keep the order the example shows. When you check an answer, run both steps on the target and do not skip either one. An option that has done only one step is nearly always waiting there.

Letters to numbers

When each letter gets its own number, try these one at a time on the first letter of the example:

  • Position: W → 23
  • Reverse position, 27 minus the position: W → 4
  • Position + k: with k = 2, W → 25
  • Position × 2: W → 46
  • Position squared: W → 529

Sometimes the numbers are the plain positions, but listed from the last letter back to the first.

The numbers may come with dashes between them or run side by side. With side-by-side codes, split the digits by the letters of the word, not by guesswork. WEST in plain positions is 23, 5, 19, 20, written 2351920. The word tells you that W is 23, so read 23 first and go on letter by letter.

Once you have the rule from one letter, check a second letter, then a third from the other example. A rule that fits only the first letter can still be wrong. In the options, the trap is usually one number off by a step, or the right numbers in the wrong order.

Word values

When the whole word becomes one number, start with the sum of the letter positions for each example, and compare it with the code.

  • Code equals the sum: plain sum of positions.
  • Code is the sum plus or minus a fixed number: sum ± k.
  • Code is bigger than the sum by the number of letters: sum + number of letters.
  • Code does not fit the plain sum at all: try reverse positions. The quick way is 27 × (number of letters) − sum. For a four-letter word that is 108 − sum.
  • Code is small and goes up with length: number of letters × k.

Examples of different lengths matter here. If both examples have four letters, "sum + 4" and "sum + number of letters" look the same, and so do "108 − sum" and the reverse-position sum. They split apart when the target has a different length. When the examples do not separate two readings, check which reading gives one of the options.

Add carefully. Wrong options in this type are often a sum that is a little off, or off by exactly 10, so add the positions twice, in a different order the second time.

Sentence codes and "either … or"

In a sentence code, every word has its own code, but the codes are not in the same order as the words. Find a word's code from the sentences it shares.

  1. Find every sentence that contains your word.
  2. Take the codes common to all of them.
  3. Strike out any of those codes that also sit in a sentence without your word, or that already belong to another word.

What is left is the code. When two words always appear together, in the same sentences and nowhere else, nothing can separate their codes. Then the answer is "either 'xx' or 'yy'". Do not pick one of the pair on a hunch. If an option offers exactly those two codes with "either … or", that is the answer.

A word that appears in only one sentence gets whatever code is left in that sentence after the other words are fixed. If two such words share that sentence, the answer is again "either … or".

The note "All the codes are two-letter codes only" simply tells you how to split the code string. Read it, then work as usual.

Letter-digit codes, in order and in any order

In order. The digits sit under the letters, so each letter's digit is read straight off: if 'WISH' is coded as '4826', then W is 4, I is 8, S is 2 and H is 6. Check that a letter in both examples has the same digit in both. Then write the target letter by letter.

In any order. The digits are mixed up, so you cannot match them by place. Use the letters the words share. Two words that share three letters share exactly three digits.

For example: 'VOTE' is coded as '2457' and 'TONE' is coded as '8254'. The words share O, T and E, and the codes share 2, 4 and 5. So V, the letter left over in VOTE, is 7, and N is 8. These two words cannot say which of O, T and E is 2. A third word would be needed.

To fix one letter, look for the words that have it and the words that do not. Take the digits common to the first group, then strike out every digit that appears in the second group.

Symbols such as @, # and ★ work exactly like digits. Treat each one as a single code.

Condition codes

A condition code gives a table of letters with their codes, then two to four conditions that change some codes. Work in this order.

  1. Look at the first and last letters of the group. Mark each one as a vowel or a consonant.
  2. Read the conditions in order and stop at the first one that is true. If the question says that every true condition is to be applied, apply them all, in order, instead.
  3. Code every letter from the table, then make the change that condition asks for.

If no condition matches, the letters keep their table codes. Read the wording slowly. "Their codes are to be interchanged" means the first and last codes swap places. "Both are to be coded as the code for the last letter" means the first letter takes the last letter's code, and the last letter keeps its own.

The wrong options are built from wrong readings: the plain table code, the change from a condition that does not apply, or the right condition applied to the wrong end. So once you have the answer, check two things. The middle letters must match the table exactly. The ends must follow the one condition that fits.

[SSC Tip] Write V or C above the first and last letters before you read a single condition. It turns the conditions into a quick match.

Decoding: running the rule backwards

Sometimes the question gives a code and asks which word it stands for. Find the rule from the examples in the usual way, then undo it.

  • A shift of +3 is undone by −3.
  • A growing shift +1, +2, +3 is undone by −1, −2, −3.
  • A reversal is undone by reversing again.
  • Opposite letters undo themselves: if T went to G, then G comes from T.

With two steps, undo them in the opposite order. If the word was reversed and then shifted +1, shift the code back by 1 and then reverse it.

The options in a decoding question are often real words that differ by a letter or two, so finish with a forward check: put your answer through the rule and make sure you get the code exactly. It takes a few seconds and catches a slip in one letter.

Take extra care with vowel rules. If vowels move +1 and consonants −1, a code letter does not tell you whether it came from a vowel or a consonant. Here it is quicker to run each option forward and see which one matches.

A 15-minute plan

Tier 1 Reasoning gives you 25 questions on their own locked 15-minute clock, which is 36 seconds each. Coding questions can be some of the quickest marks in the section, which buys time for the slow ones.

Rough targets:

  • letter shifts, rearrangements and letter-number codes: 25 to 35 seconds
  • word values: 25 to 35 seconds
  • sentence codes and letter-digit codes: 30 to 40 seconds
  • two-step codes and condition codes: up to a minute

Work in two rounds. In the first, answer everything that opens up quickly. If 30 seconds pass on a letter code and you still cannot name the rule, or a full minute goes on any coding question, mark it and move on. In the second round, go back to the marked ones with fresh eyes.

If time runs short, cross out before you guess. With +2 for a right answer and −0.5 for a wrong one, a guess among three options is worth about +0.33 of a mark on average. In codes one sure letter, or one sentence without your word, is usually enough to clear an option.

[SSC Tip] In a sentence code, start with the word that appears in the most sentences. Fixing it first often fixes the target too.