Which Numericals Come Up

Part E always has six problems, two each from Solutions, Electrochemistry and Chemical Kinetics, and you answer three. Counting all 30 Part E problems in the five exams and all 30 in the five 2027 model papers:

Type Exams 2027 model papers Priority
Arrhenius equation, two temperatures 2 5 Top
First order: k, t1/2_{1/2}, time for x% 5 3 Top
Nernst equation 1 3 High
log Kc_c or ΔrG∘\Delta_r G^\circ from E° 4 1 High
Osmotic pressure 3 3 High
Freezing or boiling point (molar mass, Kf_f, molality) 2 3 High
Conductivity, Λm_m, α, Ka_a; Kohlrausch 3 3 High
Relative lowering of vapour pressure 1 3 High
Faraday's laws 2 2 Next
Raoult's law for two volatile liquids 2 0 Next
Ea_a from a log k equation 2 0 Next
Henry's law 1 1 Next
Average rate of reaction 0 2 Next
Hydrogen electrode at a given pH 0 1 Low
Mole fraction from masses 1 0 Low
Fraction of molecules with energy ≥ Ea_a 1 0 Low

The problems below all use new numbers, so you can't lean on a remembered answer; you have to know the method. Write each one in the same three lines: formula (1 mark), substitution with units converted (1 mark), and answer with unit (1 mark).

Chemical Kinetics

Question 1 (Arrhenius, two temperatures): The rate constant of a reaction becomes five times when the temperature rises from 290 K to 310 K. Calculate Ea_a. (log 5 = 0.6990, R = 8.314 J K−1^{-1} mol−1^{-1})

Answer.

Given: k2k1\frac{k_2}{k_1} = 5; T1T_1 = 290 K; T2T_2 = 310 K; R = 8.314 J K−1^{-1} mol−1^{-1}

To find: Activation energy, EaE_a

Formula: log⁡k2k1=Ea2.303R[T2−T1T1T2]\log\frac{k_2}{k_1} = \frac{E_a}{2.303R}\left[\frac{T_2 - T_1}{T_1 T_2}\right]

Substitution: 0.6990=Ea2.303×8.314×310−290290×3100.6990 = \frac{E_a}{2.303 \times 8.314} \times \frac{310 - 290}{290 \times 310}, so Ea=0.6990×19.147×8990020E_a = \frac{0.6990 \times 19.147 \times 89900}{20}

Answer: Activation energy = 60160 J mol−1^{-1} (60.2 kJ mol−1^{-1})

Question 2 (first order, time for x%): A first order reaction is 20% complete in 10 min. How long will it take to be 75% complete? (log 1.25 = 0.0969, log 4 = 0.6021)

Answer.

Given: Taking [R]0[R]_0 = 100: after 20% reaction, [R][R] = 80 at t = 10 min; after 75% reaction, [R][R] = 25

To find: Time for 75% completion, t

Formula: k=2.303tlog⁡[R]0[R]k = \frac{2.303}{t}\log\frac{[\text{R}]_0}{[\text{R}]}

Solution:

From the first data: k=2.30310log⁡10080=0.2303×0.0969k = \frac{2.303}{10}\log\frac{100}{80} = 0.2303 \times 0.0969 = 0.02232 min−1^{-1}

For 75% completion: t=2.3030.02232log⁡10025=103.2×0.6021t = \frac{2.303}{0.02232}\log\frac{100}{25} = 103.2 \times 0.6021

Answer: Time for 75% completion = 62.1 min

Question 3 (Ea_a from a log k equation): For a reaction, log k = 10.5 − (6000 K)/T. Calculate Ea_a. (R = 8.314 J K−1^{-1} mol−1^{-1})

Answer.

Given: log k = 10.5 − (6000 K)/T; R = 8.314 J K−1^{-1} mol−1^{-1}

To find: Activation energy, EaE_a

Formula (Arrhenius equation): log⁡k=log⁡A−Ea2.303RT\log k = \log A - \frac{E_a}{2.303RT}

Comparing the two equations: Ea2.303R\frac{E_a}{2.303R} = 6000 K

Substitution: Ea=6000×2.303×8.314E_a = 6000 \times 2.303 \times 8.314

Answer: Activation energy = 1.149 × 105^5 J mol−1^{-1} (114.9 kJ mol−1^{-1})

Question 4 (average rate): For 2A → B, the concentration of A falls from 0.80 mol L−1^{-1} to 0.62 mol L−1^{-1} in 15 min. Calculate the rate of the reaction in mol L−1^{-1} min−1^{-1} and mol L−1^{-1} s−1^{-1}.

Answer.

Given: Initial [A] = 0.80 mol L−1^{-1}; final [A] = 0.62 mol L−1^{-1}; Δt\Delta t = 15 min

To find: Rate of the reaction

Formula: Rate=−12Δ[A]Δt\text{Rate} = -\frac{1}{2}\frac{\Delta[\text{A}]}{\Delta t}

Substitution: Rate=12×0.80−0.6215=0.1830\text{Rate} = \frac{1}{2} \times \frac{0.80 - 0.62}{15} = \frac{0.18}{30}

Answer: Rate = 6.0 × 10−3^{-3} mol L−1^{-1} min−1^{-1} = 1.0 × 10−4^{-4} mol L−1^{-1} s−1^{-1}

Tip: don't forget the ½; it comes from the coefficient 2 in front of A.

The fraction of molecules with energy equal to or more than Ea_a is x=10−Ea/2.303RTx = 10^{-E_a/2.303RT}. For Ea_a = 100 kJ mol−1^{-1} at 500 K, Ea2.303RT\frac{E_a}{2.303RT} = 10.45, so x = 3.6 × 10−11^{-11}.

Electrochemistry

Question 5 (Nernst equation): Calculate the emf at 298 K of the cell Fe | Fe2+^{2+} (0.01 M) || Ag+^+ (0.02 M) | Ag, given E°cell_{cell} = 1.24 V.

Answer.

Given: Ecell∘E^\circ_{cell} = 1.24 V; [Fe2+^{2+}] = 0.01 M; [Ag+^+] = 0.02 M; cell reaction Fe + 2Ag+^+ → Fe2+^{2+} + 2Ag, so n = 2

To find: EcellE_{cell}

Formula: Ecell=Ecell∘−0.05912log⁡[Fe2+][Ag+]2E_{cell} = E^\circ_{cell} - \frac{0.0591}{2}\log\frac{[\text{Fe}^{2+}]}{[\text{Ag}^+]^2}

Substitution: 0.01(0.02)2=25\frac{0.01}{(0.02)^2} = 25 and log⁡25=1.398\log 25 = 1.398, so Ecell=1.24−0.02955×1.398E_{cell} = 1.24 - 0.02955 \times 1.398

Answer: emf of the cell = 1.20 V

Question 6 (log Kc_c and ΔrG∘\Delta_r G^\circ): For a cell reaction with n = 2, E°cell_{cell} = 0.59 V at 298 K. Calculate log Kc_c and ΔrG∘\Delta_r G^\circ.

Answer.

Given: n = 2; Ecell∘E^\circ_{cell} = 0.59 V; F = 96500 C mol−1^{-1}

To find: log KcK_c and ΔrG∘\Delta_r G^\circ

Formulae: log⁡Kc=nEcell∘0.0591\log K_c = \frac{nE^\circ_{cell}}{0.0591} and ΔrG∘=−nFEcell∘\Delta_r G^\circ = -nFE^\circ_{cell}

Substitution: log⁡Kc=2×0.590.0591\log K_c = \frac{2 \times 0.59}{0.0591}; ΔrG∘=−2×96500×0.59\Delta_r G^\circ = -2 \times 96500 \times 0.59

Answer: log KcK_c = 19.97 (about 20); ΔrG∘\Delta_r G^\circ = −113870 J mol−1^{-1} (−113.9 kJ mol−1^{-1})

Question 7 (conductivity to Ka_a): The conductivity of 0.004 M acetic acid is 1.0 × 10−4^{-4} S cm−1^{-1}. Calculate its dissociation constant. (Λm0_m^0 = 390.5 S cm2^2 mol−1^{-1})

Answer.

Given: C = 0.004 mol L−1^{-1}; κ\kappa = 1.0 × 10−4^{-4} S cm−1^{-1}; Λm0\Lambda_m^0 = 390.5 S cm2^2 mol−1^{-1}

To find: Dissociation constant, KaK_a

Formulae: Λm=κ×1000C\Lambda_m = \frac{\kappa \times 1000}{C}; α=ΛmΛm0\alpha = \frac{\Lambda_m}{\Lambda_m^0}; Ka=Cα21−αK_a = \frac{C\alpha^2}{1 - \alpha}

Solution:

Λm=1.0×10−4×10000.004\Lambda_m = \frac{1.0 \times 10^{-4} \times 1000}{0.004} = 25.0 S cm2^2 mol−1^{-1}

α=25.0390.5\alpha = \frac{25.0}{390.5} = 0.0640

Ka=0.004×(0.0640)21−0.0640K_a = \frac{0.004 \times (0.0640)^2}{1 - 0.0640}

Answer: Dissociation constant = 1.75 × 10−5^{-5} mol L−1^{-1}

Question 8 (Kohlrausch's law): Calculate Λm0_m^0 of CH3_3COOH from: Λm0_m^0(CH3_3COOK) = 114.4, Λm0_m^0(HCl) = 426.2 and Λm0_m^0(KCl) = 149.9 S cm2^2 mol−1^{-1}.

Answer.

Given: Λm0\Lambda_m^0(CH3_3COOK) = 114.4, Λm0\Lambda_m^0(HCl) = 426.2, Λm0\Lambda_m^0(KCl) = 149.9 S cm2^2 mol−1^{-1}

To find: Λm0\Lambda_m^0(CH3_3COOH)

Formula (Kohlrausch's law): Λm0(CH3COOH)=Λm0(CH3COOK)+Λm0(HCl)−Λm0(KCl)\Lambda_m^0(\text{CH}_3\text{COOH}) = \Lambda_m^0(\text{CH}_3\text{COOK}) + \Lambda_m^0(\text{HCl}) - \Lambda_m^0(\text{KCl})

Substitution: Λm0(CH3COOH)=114.4+426.2−149.9\Lambda_m^0(\text{CH}_3\text{COOH}) = 114.4 + 426.2 - 149.9

Answer: Λm0\Lambda_m^0(CH3_3COOH) = 390.7 S cm2^2 mol−1^{-1}

Question 9 (Faraday's law): How long must a current of 2.0 A flow through AgNO3_3 solution to deposit 2.16 g of silver? (Ag = 108 g mol−1^{-1}, F = 96500 C mol−1^{-1})

Answer.

Given: I = 2.0 A; w = 2.16 g; M = 108 g mol−1^{-1}; Ag+^+ + e−^- → Ag, so n = 1; F = 96500 C mol−1^{-1}

To find: Time, t

Formula: w=M×I×tn×Fw = \frac{M \times I \times t}{n \times F}, so t=w×n×FM×It = \frac{w \times n \times F}{M \times I}

Substitution: t=2.16×1×96500108×2.0t = \frac{2.16 \times 1 \times 96500}{108 \times 2.0}

Answer: Time = 965 s (about 16 min)

Question 10 (hydrogen electrode): Calculate the potential of a hydrogen electrode in contact with a solution of pH 4.

Answer.

Given: pH = 4; pressure of H2_2 = 1 bar; electrode reaction H+^+ + e−^- → ½H2_2, n = 1

To find: Electrode potential, E

Formula: E=0−0.0591log⁡1[H+]=−0.0591×pHE = 0 - 0.0591\log\frac{1}{[\text{H}^+]} = -0.0591 \times \text{pH}

Substitution: E=−0.0591×4E = -0.0591 \times 4

Answer: Potential of the hydrogen electrode = −0.236 V

Solutions

Question 11 (osmotic pressure, molar mass): 0.50 g of a protein dissolved in 100 mL of water gives an osmotic pressure of 1.24 × 10−3^{-3} bar at 300 K. Find its molar mass. (R = 0.083 L bar K−1^{-1} mol−1^{-1})

Answer.

Given: w2w_2 = 0.50 g; V = 100 mL = 0.100 L; π\pi = 1.24 × 10−3^{-3} bar; T = 300 K; R = 0.083 L bar K−1^{-1} mol−1^{-1}

To find: Molar mass, M2M_2

Formula: M2=w2RTπVM_2 = \frac{w_2 RT}{\pi V}

Substitution: M2=0.50×0.083×3001.24×10−3×0.100M_2 = \frac{0.50 \times 0.083 \times 300}{1.24 \times 10^{-3} \times 0.100}

Answer: Molar mass of the protein = 1.0 × 105^5 g mol−1^{-1}

Question 12 (boiling point elevation): 2.4 g of a non-volatile non-electrolyte dissolved in 75 g of benzene raises its boiling point by 0.81 K. Find the molar mass of the solute. (Kb_b = 2.53 K kg mol−1^{-1})

Answer.

Given: w2w_2 = 2.4 g; w1w_1 = 75 g; ΔTb\Delta T_b = 0.81 K; KbK_b = 2.53 K kg mol−1^{-1}

To find: Molar mass of the solute, M2M_2

Formula: M2=1000×w2×KbΔTb×w1M_2 = \frac{1000 \times w_2 \times K_b}{\Delta T_b \times w_1}

Substitution: M2=1000×2.4×2.530.81×75M_2 = \frac{1000 \times 2.4 \times 2.53}{0.81 \times 75}

Answer: Molar mass of the solute = 100 g mol−1^{-1}

Question 13 (relative lowering of vapour pressure): 18 g of glucose is dissolved in 178.2 g of water at a temperature where the vapour pressure of water is 31.8 mm Hg. Find the vapour pressure of the solution.

Answer.

Given: w2w_2 = 18 g (glucose, 180 g mol−1^{-1}); w1w_1 = 178.2 g (water, 18 g mol−1^{-1}); p10p_1^0 = 31.8 mm Hg

To find: Vapour pressure of the solution, p1p_1

Formula: p10−p1p10=x2\frac{p_1^0 - p_1}{p_1^0} = x_2, so p1=p10(1−x2)p_1 = p_1^0(1 - x_2)

Solution:

n2=18180n_2 = \frac{18}{180} = 0.1 mol and n1=178.218n_1 = \frac{178.2}{18} = 9.9 mol

x2=0.10.1+9.9=0.01x_2 = \frac{0.1}{0.1 + 9.9} = 0.01

p1=31.8×(1−0.01)=31.8×0.99p_1 = 31.8 \times (1 - 0.01) = 31.8 \times 0.99

Answer: Vapour pressure of the solution = 31.48 mm Hg

Question 14 (Raoult's law, two volatile liquids): The vapour pressures of pure A and B are 120 and 200 mm Hg. Find the total vapour pressure of a solution with xA_A = 0.25, and the mole fraction of A in the vapour.

Answer.

Given: pA0p_A^0 = 120 mm Hg; pB0p_B^0 = 200 mm Hg; xAx_A = 0.25, so xBx_B = 0.75

To find: ptotalp_{total} and yAy_A

Formulae: ptotal=pA0xA+pB0xBp_{total} = p_A^0 x_A + p_B^0 x_B and yA=pAptotaly_A = \frac{p_A}{p_{total}}

Solution:

pAp_A = 120 × 0.25 = 30 mm Hg and pBp_B = 200 × 0.75 = 150 mm Hg

ptotalp_{total} = 30 + 150 = 180 mm Hg

yA=30180y_A = \frac{30}{180}

Answer: Total vapour pressure = 180 mm Hg; mole fraction of A in the vapour = 0.167

For Henry's law problems the same layout applies: x=pKHx = \frac{p}{K_H}, with p converted to the same unit as KH_H, and x has no unit. For example, CO2_2 at 2.5 atm (2.53 × 105^5 Pa) with KH_H = 1.67 × 108^8 Pa gives x = 1.52 × 10−3^{-3}.