About This Paper

This is a practice paper, not a leaked or official one. We set it the way the board sets its own papers.

Each question number comes from the same chapter as in the March 2026 paper, so every chapter carries its usual marks (Solutions 12, Electrochemistry 13, Chemical Kinetics 12, d- and f-Block 10, Coordination Compounds 11, Haloalkanes 9, Alcohols 10, Aldehydes 12, Amines 7, Biomolecules 9). Almost every question is on a Tier 1 or Tier 2 topic from the first section of this chapter. A few are close to questions already asked, because the board does repeat itself, but most are new wordings or new numbers. The layout is the board's too: 15 MCQs, 5 fill-in-the-blanks, then Parts B to E with the usual internal choice, for a total of 70 marks.

How to use it: sit the paper in 3 hours without notes, then mark yourself with the answers that follow. Make a note of every question you skipped or lost marks on, and go back to those topics first.

Question Paper: Part A

I. Select the correct option from the given choices. (15 × 1 = 15)

1. Which of the following undergoes S3_3 reaction fastest?
(a) CH3_3CH2_2Br
(b) (CH3_3)2_2CHBr
(c) (CH3_3)3_3CBr
(d) CH3_3Br

2. Which of the following is a colligative property?
(a) Vapour pressure
(b) Osmotic pressure
(c) Boiling point
(d) Density

3. Which of the following ions is colourless in aqueous solution?
(a) Sc3+^{3+}
(b) Ti3+^{3+}
(c) Cu2+^{2+}
(d) V3+^{3+}

4. Rosenmund reduction converts acyl chlorides into
(a) alcohols
(b) aldehydes
(c) ketones
(d) carboxylic acids

5. Phenol is less acidic than
(a) ethanol
(b) o-cresol
(c) o-nitrophenol
(d) water

6. Aniline reacts with bromine water at room temperature to give
(a) 2,4,6-tribromoaniline
(b) p-bromoaniline
(c) o-bromoaniline
(d) m-bromoaniline

7. The vitamin needed for normal clotting of blood is
(a) vitamin A
(b) vitamin C
(c) vitamin D
(d) vitamin K

8. The half-life of a first order reaction is 69.3 s. Its rate constant is
(a) 0.1 s−1^{-1}
(b) 0.01 s−1^{-1}
(c) 10 s−1^{-1}
(d) 1 s−1^{-1}

9. Which of the following amines does not react with Hinsberg's reagent?
(a) C2_2H5_5NH2_2
(b) (C2_2H5_5)2_2NH
(c) C6_6H5_5NH2_2
(d) (C2_2H5_5)3_3N

10. The charge carried by one mole of electrons is approximately
(a) 96487 C
(b) 1.6 × 10−19^{-19} C
(c) 6.022 × 1023^{23} C
(d) 9.65 C

11. Chloroform is slowly oxidised by air in the presence of light to
(a) CCl4_4
(b) CH2_2Cl2_2
(c) COCl2_2
(d) HCOOH

12. The van't Hoff factor of K2_2SO4_4, assuming complete dissociation, is
(a) 1
(b) 2
(c) 3
(d) 4

13. The spin-only magnetic moment of Mn2+^{2+} (Z = 25) is about
(a) 1.73 BM
(b) 2.84 BM
(c) 4.90 BM
(d) 5.92 BM

14. The IUPAC name of K3_3[Fe(CN)6_6] is
(a) potassium hexacyanidoferrate(III)
(b) potassium hexacyanidoferrate(II)
(c) potassium hexacyanidoiron(III)
(d) tripotassium hexacyanidoferrate

15. Ethanol heated with concentrated H2_2SO4_4 at 443 K gives
(a) ethoxyethane
(b) ethene
(c) ethanal
(d) ethyl hydrogen sulphate

II. Fill in the blanks by choosing the appropriate word from those given in the brackets. (5 × 1 = 5)

[six, picric, hydrogen, aldol, isotonic, hypotonic]

16. The coordination number of cobalt in [Co(en)3_3]3+^{3+} is __.

17. Phenol reacts with concentrated nitric acid to give __ acid.

18. The two strands of DNA are held together by __ bonds.

19. Aldehydes and ketones having at least one α-hydrogen undergo __ condensation in dilute alkali.

20. Two solutions having the same osmotic pressure at a given temperature are called __ solutions.

Question Paper: Parts B to E

Part B

III. Answer any three of the following. Each question carries 2 marks. (3 × 2 = 6)

21. Transition metals form a large number of complex compounds. Give two reasons.

22. Haloarenes are less reactive than haloalkanes towards nucleophilic substitution. Give two reasons.

23. What is the rate constant of a reaction? Write its unit for a zero order reaction.

24. Write two differences between fibrous and globular proteins.

25. Explain Williamson ether synthesis with a chemical equation.

Part C

IV. Answer any three of the following. Each question carries 3 marks. (3 × 3 = 9)

26. Using valence bond theory, explain the hybridisation, geometry and magnetic property of [NiCl4_4]2−^{2-}. [Atomic number of Ni = 28]

27. How is potassium permanganate prepared from pyrolusite ore? Write the equations.

28. What is a chelate? Name the type of isomerism shown by [Co(NH3_3)5_5(SO4_4)]Br and [Co(NH3_3)5_5Br]SO4_4, and give a test to tell them apart.

29. Explain why (i) Zn, Cd and Hg are not regarded as transition metals, (ii) transition metals show variable oxidation states, (iii) Mn2+^{2+} resists oxidation more than Fe2+^{2+}.

30. Write the IUPAC names of: (i) [Co(NH3_3)4_4(H2_2O)Cl]Cl2_2 (ii) K2_2Zn(OH)4_4 [Pt(NH3_3)2_2Cl2_2]

V. Answer any two of the following. Each question carries 3 marks. (2 × 3 = 6)

31. Derive the integrated rate equation for a first order reaction and write the expression for its half-life.

32. Write three differences between a galvanic cell and an electrolytic cell.

33. What are azeotropes? Explain minimum boiling and maximum boiling azeotropes with one example each.

34. State Kohlrausch's law of independent migration of ions. Write two applications of it.

Part D

VI. Answer any four of the following. Each question carries 5 marks. (4 × 5 = 20)

35. (a) What is denaturation of proteins? Give an example. (2)
(b) Write two differences between DNA and RNA. (2)
(c) Deficiency of which vitamin causes pernicious anaemia? (1)

36. (a) Write the S@@GYANGHAR_MATH@@192 mechanism for the conversion of chloromethane to methanol. Why does the product show inversion of configuration? (3)
(b) Explain Wurtz reaction with a chemical equation. (2)

37. (a) How is methanamine prepared by Hofmann bromamide degradation? Write the equation. (2)
(b) Write the coupling reaction of benzenediazonium chloride with aniline. (2)
(c) Which is the stronger base, aniline or ammonia? (1)

38. (a) Write the steps in the mechanism of acid-catalysed hydration of ethene to ethanol. (3)
(b) Phenol with dilute nitric acid gives a mixture of two products. Name them and say which one is steam volatile, and why. (2)

39. (a) Propanoic acid reacts with SOCl2_2 to give A. A is hydrogenated over Pd–BaSO4_4 to give B. B with dilute NaOH gives C. Identify A, B and C. (3)
(b) Carboxylic acids don't give the usual reactions of the carbonyl group. Explain. (2)

40. (a) Write the mechanism of nucleophilic addition of HCN to a carbonyl compound in the presence of a base. (3)
(b) Explain the Gattermann–Koch reaction with an equation. (2)

Part E

VII. Answer any three of the following. Each question carries 3 marks. (3 × 3 = 9)

41. Calculate the osmotic pressure of a solution containing 3.42 g of sucrose (molar mass 342 g mol−1^{-1}) in 250 mL of water at 27 °C. (R = 0.083 L bar K−1^{-1} mol−1^{-1})

42. The rate constant of a reaction is 1.5 × 10−3^{-3} s−1^{-1} at 300 K and 4.5 × 10−3^{-3} s−1^{-1} at 320 K. Calculate the energy of activation. (log 3 = 0.4771, R = 8.314 J K−1^{-1} mol−1^{-1})

43. For the cell reaction Cu(s) + 2Ag+^+(aq) → Cu2+^{2+}(aq) + 2Ag(s), E°cell_{cell} = 0.46 V at 298 K. Calculate the standard Gibbs energy and log Kc_c. (F = 96500 C mol−1^{-1})

44. 0.90 g of a non-electrolyte dissolved in 50 g of water lowers its freezing point by 0.186 K. Find the molar mass of the solute. (Kf_f for water = 1.86 K kg mol−1^{-1})

45. Calculate the emf of the cell Zn | Zn2+^{2+} (0.001 M) || Cu2+^{2+} (0.1 M) | Cu at 298 K. (E°cell_{cell} = 1.10 V)

46. The half-life of a first order reaction is 30 min. Calculate the time needed for 90% of the reaction to be completed.

Answers: Part A

Question 1: Fastest S3_3 among the four bromides?

Answer. (c) (CH3_3)3_3CBr. S2+^{2+} goes through a carbocation. The tertiary carbocation from (CH3_3)3_3CBr is the most stable, so it reacts fastest.

Question 2: Which property is colligative?

Answer. (b) Osmotic pressure. Osmotic pressure depends only on the number of solute particles. Vapour pressure itself isn't colligative; the relative lowering of it is.

Question 3: Colourless ion among Sc3+^{3+}, Ti3+^{3+}, Cu2+^{2+}, V3+^{3+}?

Answer. (a) Sc3+^{3+}. Sc3+^{3+} is 3d0^0, so no d–d transition is possible. The others have unpaired d electrons and are coloured.

Question 4: Product of Rosenmund reduction?

Answer. (b) aldehydes. H2_2 over Pd poisoned with BaSO4_4 stops the reduction at the aldehyde stage.

Question 5: Phenol is less acidic than which compound?

Answer. (c) o-nitrophenol. The –NO2_2 group pulls electrons away and stabilises the phenoxide ion, so o-nitrophenol is more acidic than phenol. Ethanol, o-cresol and water are all weaker acids.

Question 6: Product of aniline with bromine water?

Answer. (a) 2,4,6-tribromoaniline. –NH2_2 activates the ring so strongly that all three ortho and para positions are brominated, giving a white precipitate.

Question 7: Vitamin needed for blood clotting?

Answer. (d) vitamin K. Lack of vitamin K increases the blood clotting time. Lack of vitamins A, C and D causes night blindness, scurvy and rickets.

Question 8: k of a first order reaction with half-life 69.3 s?

Answer. (b) 0.01 s−1^{-1}. k = 0.693/t1/2_{1/2} = 0.693/69.3 = 0.01 s−1^{-1}.

Question 9: Amine that doesn't react with Hinsberg's reagent?

Answer. (d) (C2_2H5_5)3_3N. A tertiary amine has no hydrogen on nitrogen, so it can't form a sulphonamide.

Question 10: Charge on one mole of electrons?

Answer. (a) 96487 C. One mole of electrons carries one faraday, about 96487 C (taken as 96500 C in problems).

Question 11: Poisonous gas formed when chloroform is oxidised by air in light?

Answer. (c) COCl2_2. It forms carbonyl chloride (phosgene), which is very poisonous. That's why chloroform is stored in closed dark bottles filled to the top.

Question 12: van't Hoff factor of K2_2SO4_4?

Answer. (c) 3. K2_2SO4_4 → 2K+^+ + SO42−_4^{2-}: three ions, so i = 3.

Question 13: Spin-only magnetic moment of Mn2+^{2+}?

Answer. (d) 5.92 BM. Mn2+^{2+} is 3d5^5 with five unpaired electrons: μ=5×7=35\mu = \sqrt{5 \times 7} = \sqrt{35} = 5.92 BM.

Question 14: IUPAC name of K3_3[Fe(CN)6_6]?

Answer. (a) potassium hexacyanidoferrate(III). Three K+^+ balance a 3− complex ion, so Fe is +3. In an anionic complex the metal name ends in -ate, and iron becomes ferrate.

Question 15: Product of ethanol with conc. H2_2SO4_4 at 443 K?

Answer. (b) ethene. At 443 K ethanol loses water within the molecule to give ethene. At 413 K two molecules join to give ethoxyethane.

Question 16: The coordination number of cobalt in [Co(en)3_3]3+^{3+} is __.

Answer. six. Each ethane-1,2-diamine is didentate, so three of them make six bonds to cobalt.

Question 17: Phenol reacts with concentrated nitric acid to give __ acid.

Answer. picric. Concentrated HNO3_3 nitrates all three ortho and para positions: 2,4,6-trinitrophenol, called picric acid.

Question 18: The two strands of DNA are held together by __ bonds.

Answer. hydrogen. Adenine pairs with thymine and guanine with cytosine through hydrogen bonds.

Question 19: Aldehydes and ketones having at least one α-hydrogen undergo __ condensation in dilute alkali.

Answer. aldol. The α-hydrogen lets them form an enolate that attacks a second molecule, giving a β-hydroxy aldehyde or ketone.

Question 20: Two solutions having the same osmotic pressure at a given temperature are called __ solutions.

Answer. isotonic. Isotonic solutions have equal osmotic pressure, so no osmosis happens between them. A solution with lower osmotic pressure is hypotonic.

Answers: Part B

Question 21: Transition metals form a large number of complex compounds. Give two reasons.

Answer. Transition metals form a large number of complex compounds because:

  1. Their ions are small in size and carry a high charge.
  2. They have vacant d orbitals of suitable energy, which can accept lone pairs of electrons from the ligands.

Marks: any two reasons, 1 each.

Question 22: Haloarenes are less reactive than haloalkanes towards nucleophilic substitution. Give two reasons.

Answer. Haloarenes are less reactive than haloalkanes towards nucleophilic substitution because:

  1. Resonance effect: the lone pair of electrons on the halogen is in resonance with the benzene ring, so the C–X bond gets a partial double bond character and is difficult to break.
  2. sp2^2 hybridised carbon: the carbon attached to the halogen is sp2^2 hybridised, so the C–X bond is shorter and stronger than in haloalkanes.

Also accepted: the electron-rich ring repels the incoming nucleophile; the phenyl cation is not stabilised by resonance, so S@@GYANGHAR_MATH@@21 can't happen. Marks: any two reasons, 1 each.

Question 23: What is the rate constant of a reaction? Write its unit for a zero order reaction.

Answer. The rate constant of a reaction is the rate of the reaction when the concentration of each reactant is unity (1 mol L−1^{-1}). It is also called the specific reaction rate.

The unit of the rate constant for a zero order reaction is mol L−1^{-1} s−1^{-1}.

Marks: definition 1, unit 1.

Question 24: Write two differences between fibrous and globular proteins.

Answer.

Fibrous proteins Globular proteins
The polypeptide chains run parallel and form long fibre-like structures. The polypeptide chains coil around to give a spherical shape.
They are insoluble in water. They are soluble in water.

Examples: keratin and myosin are fibrous proteins; insulin and albumin are globular proteins.

Marks: any two differences, 1 each.

Question 25: Explain Williamson ether synthesis with a chemical equation.

Answer. When an alkyl halide is treated with a sodium alkoxide, an ether is formed. This is called Williamson synthesis.

CH3CH2Br+CH3CH2ONa→CH3CH2OCH2CH3+NaBr\text{CH}_3\text{CH}_2\text{Br} + \text{CH}_3\text{CH}_2\text{ONa} \rightarrow \text{CH}_3\text{CH}_2\text{OCH}_2\text{CH}_3 + \text{NaBr}

A primary alkyl halide should be used, because a tertiary alkyl halide gives an alkene by elimination.

Marks: statement 1, equation 1.

Answers: Part C

Question 26: Using valence bond theory, explain the hybridisation, geometry and magnetic property of [NiCl4_4]2−^{2-}. [Atomic number of Ni = 28]

Answer. In [NiCl4_4]2−^{2-}, nickel is in the +2 state, so Ni2+^{2+} is [Ar] 3d8^8 with two unpaired electrons.

Cl−^- is a weak field ligand, so the two unpaired 3d electrons do not pair up. One 4s and three 4p orbitals mix to form four sp3^3 hybrid orbitals, which accept four electron pairs from four Cl−^- ions.

3d 4s 4p
Ni2+^{2+} ion ↑↓ ↑↓ ↑↓ ↑ ↑ [ ] [ ] [ ] [ ]
In [NiCl4_4]2−^{2-} ↑↓ ↑↓ ↑↓ ↑ ↑ xx xx xx xx

(xx = electron pair donated by Cl−^-)

  • Hybridisation: sp3^3
  • Geometry: tetrahedral
  • Magnetic property: two unpaired electrons, so it is paramagnetic

Marks: explanation with hybridisation 1, geometry 1, magnetic property 1. Compare [Ni(CN)4_4]2−^{2-}: CN−^- pairs the electrons, giving dsp2^2, square planar and diamagnetic.

Question 27: How is potassium permanganate prepared from pyrolusite ore? Write the equations.

Answer. Potassium permanganate is prepared from pyrolusite ore (MnO2_2) as follows.

Step 1: MnO2_2 is fused with KOH in the presence of air to give green potassium manganate.

2MnO2+4KOH+O2→2K2MnO4+2H2O2\text{MnO}_2 + 4\text{KOH} + \text{O}_2 \rightarrow 2\text{K}_2\text{MnO}_4 + 2\text{H}_2\text{O}

Step 2: Potassium manganate disproportionates in neutral or acidic solution to give potassium permanganate.

3MnO42−+4H+→2MnO4−+MnO2+2H2O3\text{MnO}_4^{2-} + 4\text{H}^+ \rightarrow 2\text{MnO}_4^- + \text{MnO}_2 + 2\text{H}_2\text{O}

Commercially, the manganate is oxidised electrolytically in alkaline solution:

MnO42−→MnO4−+e−\text{MnO}_4^{2-} \rightarrow \text{MnO}_4^- + e^-

Marks: 1 for each equation.

Question 28: What is a chelate? Name the type of isomerism shown by [Co(NH3_3)5_5(SO4_4)]Br and [Co(NH3_3)5_5Br]SO4_4, and give a test to tell them apart.

Answer. A chelate is a complex in which a didentate or polydentate ligand is bound to the metal through two or more donor atoms, forming a ring.

[Co(NH3_3)5_5(SO4_4)]Br and [Co(NH3_3)5_5Br]SO4_4 show ionisation isomerism, because they give different ions in solution.

Test: [Co(NH3_3)5_5(SO4_4)]Br gives a pale yellow precipitate of AgBr with AgNO3_3 solution, because Br−^- is outside the bracket. [Co(NH3_3)5_5Br]SO4_4 gives a white precipitate of BaSO4_4 with BaCl2_2 solution, because SO42−_4^{2-} is outside the bracket.

Marks: chelate 1, type of isomerism 1, test 1.

Question 29: Explain why (i) Zn, Cd and Hg are not regarded as transition metals, (ii) transition metals show variable oxidation states, (iii) Mn2+^{2+} resists oxidation more than Fe2+^{2+}.

Answer.

(i) Zn, Cd and Hg have completely filled d orbitals (d10^{10}) both in their atoms and in their common oxidation states. So they are not regarded as transition metals.

(ii) In transition metals, the energies of the (n−1)d and ns electrons are nearly the same. So different numbers of these electrons can take part in bonding, and they show variable oxidation states.

(iii) Mn2+^{2+} has the configuration 3d5^5, which is a stable half-filled set, so it does not easily lose another electron. Fe2+^{2+} is 3d6^6; by losing one electron it becomes Fe3+^{3+} (3d5^5), which is more stable. So Mn2+^{2+} resists oxidation more than Fe2+^{2+}.

Marks: 1 for each reason.

Question 30: Write the IUPAC names of: (i) [Co(NH3_3)4_4(H2_2O)Cl]Cl2_2 (ii) K2_2Zn(OH)4_4 [Pt(NH3_3)2_2Cl2_2]

Answer.

(i) [Co(NH3_3)4_4(H2_2O)Cl]Cl2_2: tetraammineaquachloridocobalt(III) chloride

(ii) K2_2[Zn(OH)4_4]: potassium tetrahydroxidozincate(II)

(iii) [Pt(NH3_3)2_2Cl2_2]: diamminedichloridoplatinum(II)

Marks: 1 for each name. Ligands are named in alphabetical order (ammine, aqua, chlorido), ignoring prefixes like tetra-.

Question 31: Derive the integrated rate equation for a first order reaction and write the expression for its half-life.

Answer. Consider the first order reaction R → P.

Rate=−d[R]dt=k[R]\text{Rate} = -\frac{d[\text{R}]}{dt} = k[\text{R}]

d[R][R]=−k dt\frac{d[\text{R}]}{[\text{R}]} = -k\,dt

Integrating both sides: ln⁡[R]=−kt+I\ln[\text{R}] = -kt + I

At t=0t = 0, [R]=[R]0[\text{R}] = [\text{R}]_0, so I=ln⁡[R]0I = \ln[\text{R}]_0. Substituting:

k=2.303tlog⁡[R]0[R]k = \frac{2.303}{t}\log\frac{[\text{R}]_0}{[\text{R}]}

At t=t1/2t = t_{1/2}, [R]=[R]02[\text{R}] = \frac{[\text{R}]_0}{2}, so

t1/2=2.303klog⁡2=0.693kt_{1/2} = \frac{2.303}{k}\log 2 = \frac{0.693}{k}

Marks: rate law and integration 1, integrated equation 1, half-life 1.

Question 32: Write three differences between a galvanic cell and an electrolytic cell.

Answer.

Galvanic cell Electrolytic cell
It converts chemical energy into electrical energy. It uses electrical energy to bring about a chemical change.
The cell reaction is spontaneous. The cell reaction is non-spontaneous.
The anode is negative and the cathode is positive. The anode is positive and the cathode is negative.

Marks: 1 for each difference.

Question 33: What are azeotropes? Explain minimum boiling and maximum boiling azeotropes with one example each.

Answer. Azeotropes are binary mixtures which have the same composition in the liquid and vapour phases and boil at a constant temperature. They cannot be separated by fractional distillation.

Minimum boiling azeotrope: it is formed by solutions which show a large positive deviation from Raoult's law. Example: about 95% ethanol in water.

Maximum boiling azeotrope: it is formed by solutions which show a large negative deviation from Raoult's law. Example: about 68% nitric acid in water.

Marks: definition 1, each type with example 1.

Question 34: State Kohlrausch's law of independent migration of ions. Write two applications of it.

Answer. Kohlrausch's law of independent migration of ions states that the limiting molar conductivity of an electrolyte is the sum of the limiting ionic conductivities of its cation and anion.

Λm0=ν+λ+0+ν−λ−0\Lambda_m^0 = \nu_+\lambda_+^0 + \nu_-\lambda_-^0

Applications:

  1. It is used to find Λm0\Lambda_m^0 of a weak electrolyte such as CH3_3COOH, which cannot be found from a graph.
  2. It is used to find the degree of dissociation, α=ΛmΛm0\alpha = \frac{\Lambda_m}{\Lambda_m^0}, and from it the dissociation constant of a weak electrolyte.

Marks: statement 1, each application 1.

Answers: Part D

Question 35: (a) Denaturation of proteins, with an example. (2) (b) Two differences between DNA and RNA. (2) (c) Vitamin whose deficiency causes pernicious anaemia. (1)

Answer.

(a) When a protein is heated or its pH is changed, its hydrogen bonds break and the globules unfold. The protein loses its secondary and tertiary structure and its biological activity, while the primary structure stays the same. This is called denaturation of proteins.

Example: coagulation of egg white on boiling, or curdling of milk.

(b)

DNA RNA
The sugar is β-D-2-deoxyribose. The sugar is β-D-ribose.
It contains thymine. It contains uracil instead of thymine.
It is double stranded. It is single stranded.

(c) Deficiency of vitamin B12_{12} causes pernicious anaemia.

Marks: (a) definition 1, example 1; (b) any two differences, 1 each; (c) 1.

Question 36: (a) SH2O+H+→H3O+\text{H}_2\text{O} + \text{H}^+ \rightarrow \text{H}_3\text{O}^+ mechanism of chloromethane to methanol, and why inversion happens. (3) (b) Wurtz reaction. (2)

Answer.

(a) The conversion of chloromethane to methanol takes place by the S3_3 mechanism in one step, through a transition state.

HO−+CH3-Cl→[HO⋯CH3⋯Cl]−→HO-CH3+Cl−\text{HO}^- + \text{CH}_3\text{-Cl} \rightarrow [\text{HO}\cdots\text{CH}_3\cdots\text{Cl}]^- \rightarrow \text{HO-CH}_3 + \text{Cl}^-

The OH−^- ion attacks the carbon from the side opposite to the chlorine atom. As the Cl−^- leaves, the other three groups on the carbon flip over, like an umbrella turning inside out in the wind. So the product shows inversion of configuration.

(b) When an alkyl halide is treated with sodium in dry ether, two alkyl groups join to give an alkane with double the number of carbon atoms. This is called the Wurtz reaction.

2CH3Br+2Na→dry etherCH3-CH3+2NaBr2\text{CH}_3\text{Br} + 2\text{Na} \xrightarrow{\text{dry ether}} \text{CH}_3\text{-CH}_3 + 2\text{NaBr}

Marks: (a) transition state 1, products 1, reason for inversion 1; (b) statement 1, equation 1.

Question 37: (a) Methanamine by Hofmann bromamide degradation. (2) (b) Coupling of benzenediazonium chloride with aniline. (2) (c) Stronger base: aniline or ammonia. (1)

Answer.

(a) When acetamide is heated with bromine and aqueous sodium hydroxide, methanamine is formed. The amine has one carbon atom less than the amide. This is Hofmann bromamide degradation.

CH3CONH2+Br2+4NaOH→CH3NH2+Na2CO3+2NaBr+2H2O\text{CH}_3\text{CONH}_2 + \text{Br}_2 + 4\text{NaOH} \rightarrow \text{CH}_3\text{NH}_2 + \text{Na}_2\text{CO}_3 + 2\text{NaBr} + 2\text{H}_2\text{O}

(b) Benzene diazonium chloride couples with aniline in a mildly acidic medium. The diazonium ion attacks the para position of aniline, and p-aminoazobenzene, a yellow dye, is formed.

C6H5N2+Cl−+C6H5NH2→H+C6H5-N=N-C6H4-NH2 (p)+HCl\text{C}_6\text{H}_5\text{N}_2^+\text{Cl}^- + \text{C}_6\text{H}_5\text{NH}_2 \xrightarrow{\text{H}^+} \text{C}_6\text{H}_5\text{-N=N-C}_6\text{H}_4\text{-NH}_2\ (p) + \text{HCl}

(c) Ammonia is the stronger base. In aniline, the lone pair on nitrogen is delocalised into the benzene ring, so it is less available to accept a proton.

Marks: (a) statement 1, equation 1; (b) statement 1, equation 1; (c) 1.

Question 38: (a) Mechanism of acid-catalysed hydration of ethene. (3) (b) Products of phenol with dilute HNO3_3; which is steam volatile and why. (2)

Answer.

(a) The acid-catalysed hydration of ethene to ethanol takes place in three steps.

Step 1: Protonation of ethene by H3_3O+^+ to form a carbocation.

H2O+H+→H3O+\text{H}_2\text{O} + \text{H}^+ \rightarrow \text{H}_3\text{O}^+; CH2=CH2+H3O+→CH3-CH2++H2O\text{CH}_2\text{=CH}_2 + \text{H}_3\text{O}^+ \rightarrow \text{CH}_3\text{-CH}_2^+ + \text{H}_2\text{O}

Step 2: Nucleophilic attack of water on the carbocation.

CH3-CH2++H2O→CH3-CH2-OH2+\text{CH}_3\text{-CH}_2^+ + \text{H}_2\text{O} \rightarrow \text{CH}_3\text{-CH}_2\text{-OH}_2^+

Step 3: Deprotonation to form ethanol.

CH3-CH2-OH2++H2O→CH3CH2OH+H3O+\text{CH}_3\text{-CH}_2\text{-OH}_2^+ + \text{H}_2\text{O} \rightarrow \text{CH}_3\text{CH}_2\text{OH} + \text{H}_3\text{O}^+

(b) Phenol with dilute nitric acid gives a mixture of o-nitrophenol and p-nitrophenol. o-Nitrophenol is steam volatile, because it has intramolecular hydrogen bonding. p-Nitrophenol molecules are held together by intermolecular hydrogen bonds, so it is less volatile.

Marks: (a) 1 for each step, with charges; (b) products 1, reason 1.

Question 39: (a) Propanoic acid → (SOCl2_2) A → (H2_2, Pd–BaSO4_4) B → (dil. NaOH) C. Identify A, B and C. (3) (b) Why carboxylic acids don't show the usual carbonyl reactions. (2)

Answer.

(a)

A = propanoyl chloride, CH3_3CH2_2COCl

CH3CH2COOH+SOCl2→CH3CH2COCl+SO2+HCl\text{CH}_3\text{CH}_2\text{COOH} + \text{SOCl}_2 \rightarrow \text{CH}_3\text{CH}_2\text{COCl} + \text{SO}_2 + \text{HCl}

B = propanal, CH3_3CH2_2CHO (Rosenmund reduction)

CH3CH2COCl+H2→Pd-BaSO4CH3CH2CHO+HCl\text{CH}_3\text{CH}_2\text{COCl} + \text{H}_2 \xrightarrow{\text{Pd-BaSO}_4} \text{CH}_3\text{CH}_2\text{CHO} + \text{HCl}

C = 3-hydroxy-2-methylpentanal, CH3_3CH2_2CH(OH)CH(CH3_3)CHO (aldol)

2CH3CH2CHO→dil. NaOHCH3CH2CH(OH)CH(CH3)CHO2\text{CH}_3\text{CH}_2\text{CHO} \xrightarrow{\text{dil. NaOH}} \text{CH}_3\text{CH}_2\text{CH(OH)CH(CH}_3)\text{CHO}

(b) In the –COOH group, the lone pair of electrons on the oxygen of –OH is in resonance with the C=O group. So the carbonyl carbon is less electrophilic, and carboxylic acids do not give the nucleophilic addition reactions of aldehydes and ketones.

Marks: (a) A, B, C 1 each; (b) resonance 1, effect on the carbonyl carbon 1.

Question 40: (a) Mechanism of addition of HCN to a carbonyl group in the presence of base. (3) (b) Gattermann–Koch reaction. (2)

Answer.

(a) The addition of HCN to a carbonyl compound is a nucleophilic addition. It takes place in three steps.

Step 1: The base generates the cyanide ion.

HCN+OH−→CN−+H2O\text{HCN} + \text{OH}^- \rightarrow \text{CN}^- + \text{H}_2\text{O}

Step 2: CN−^- attacks the carbonyl carbon, forming a tetrahedral alkoxide ion.

>C=O+CN−→>C(CN)-O−\text{>C=O} + \text{CN}^- \rightarrow \text{>C(CN)-O}^-

Step 3: The alkoxide ion takes a proton from water to form the cyanohydrin.

>C(CN)-O−+H2O→>C(CN)-OH+OH−\text{>C(CN)-O}^- + \text{H}_2\text{O} \rightarrow \text{>C(CN)-OH} + \text{OH}^-

(b) When benzene is treated with carbon monoxide and hydrogen chloride in the presence of anhydrous AlCl3_3 or CuCl, benzaldehyde is formed. This is the Gattermann–Koch reaction.

C6H6+CO+HCl→anhyd. AlCl3/CuClC6H5CHO\text{C}_6\text{H}_6 + \text{CO} + \text{HCl} \xrightarrow{\text{anhyd. AlCl}_3/\text{CuCl}} \text{C}_6\text{H}_5\text{CHO}

Marks: (a) 1 for each step; (b) statement 1, equation 1.

Answers: Part E

Question 41: Calculate the osmotic pressure of a solution containing 3.42 g of sucrose (molar mass 342 g mol−1^{-1}) in 250 mL of water at 27 °C. (R = 0.083 L bar K−1^{-1} mol−1^{-1})

Answer.

Given: Mass of sucrose, w = 3.42 g; molar mass, M = 342 g mol−1^{-1}; V = 250 mL = 0.250 L; T = 27 + 273 = 300 K; R = 0.083 L bar K−1^{-1} mol−1^{-1}

To find: Osmotic pressure, π\pi

Formula: π=nVRT\pi = \frac{n}{V}RT

Substitution: n=3.42342n = \frac{3.42}{342} = 0.01 mol, so π=0.010.250×0.083×300\pi = \frac{0.01}{0.250} \times 0.083 \times 300

Answer: Osmotic pressure = 0.996 bar

Marks: formula 1, substitution 1, answer with unit 1.

Question 42: The rate constant of a reaction is 1.5 × 10−3^{-3} s−1^{-1} at 300 K and 4.5 × 10−3^{-3} s−1^{-1} at 320 K. Calculate the energy of activation. (log 3 = 0.4771, R = 8.314 J K−1^{-1} mol−1^{-1})

Answer.

Given: k1k_1 = 1.5 × 10−3^{-3} s−1^{-1} at T1T_1 = 300 K; k2k_2 = 4.5 × 10−3^{-3} s−1^{-1} at T2T_2 = 320 K; R = 8.314 J K−1^{-1} mol−1^{-1}

To find: Activation energy, EaE_a

Formula: log⁡k2k1=Ea2.303R[T2−T1T1T2]\log\frac{k_2}{k_1} = \frac{E_a}{2.303R}\left[\frac{T_2 - T_1}{T_1 T_2}\right]

Substitution: k2k1\frac{k_2}{k_1} = 3, so 0.4771=Ea2.303×8.314×20300×3200.4771 = \frac{E_a}{2.303 \times 8.314} \times \frac{20}{300 \times 320}

Ea=0.4771×19.147×9600020E_a = \frac{0.4771 \times 19.147 \times 96000}{20}

Answer: Activation energy = 43850 J mol−1^{-1} (43.85 kJ mol−1^{-1})

Marks: formula 1, substitution 1, answer with unit 1.

Question 43: For the cell reaction Cu(s) + 2Ag+^+(aq) → Cu2+^{2+}(aq) + 2Ag(s), E°cell_{cell} = 0.46 V at 298 K. Calculate the standard Gibbs energy and log Kc_c. (F = 96500 C mol−1^{-1})

Answer.

Given: Ecell∘E^\circ_{cell} = 0.46 V; n = 2; F = 96500 C mol−1^{-1}

To find: ΔrG∘\Delta_r G^\circ and log KcK_c

Formulae: ΔrG∘=−nFEcell∘\Delta_r G^\circ = -nFE^\circ_{cell} and log⁡Kc=nEcell∘0.0591\log K_c = \frac{nE^\circ_{cell}}{0.0591}

Substitution: ΔrG∘=−2×96500×0.46\Delta_r G^\circ = -2 \times 96500 \times 0.46; log⁡Kc=2×0.460.0591\log K_c = \frac{2 \times 0.46}{0.0591}

Answer: ΔrG∘\Delta_r G^\circ = −88780 J mol−1^{-1} (−88.78 kJ mol−1^{-1}); log KcK_c = 15.57

Marks: formulae 1, substitution 1, answers with units 1.

Question 44: 0.90 g of a non-electrolyte dissolved in 50 g of water lowers its freezing point by 0.186 K. Find the molar mass of the solute. (Kf_f for water = 1.86 K kg mol−1^{-1})

Answer.

Given: Mass of solute, w2w_2 = 0.90 g; mass of water, w1w_1 = 50 g; ΔTf\Delta T_f = 0.186 K; KfK_f = 1.86 K kg mol−1^{-1}

To find: Molar mass of the solute, M2M_2

Formula: M2=1000×w2×KfΔTf×w1M_2 = \frac{1000 \times w_2 \times K_f}{\Delta T_f \times w_1}

Substitution: M2=1000×0.90×1.860.186×50M_2 = \frac{1000 \times 0.90 \times 1.86}{0.186 \times 50}

Answer: Molar mass of the solute = 180 g mol−1^{-1}

Marks: formula 1, substitution 1, answer with unit 1.

Question 45: Calculate the emf of the cell Zn | Zn2+^{2+} (0.001 M) || Cu2+^{2+} (0.1 M) | Cu at 298 K. (E°cell_{cell} = 1.10 V)

Answer.

Given: Ecell∘E^\circ_{cell} = 1.10 V; [Zn2+^{2+}] = 0.001 M; [Cu2+^{2+}] = 0.1 M; cell reaction Zn + Cu2+^{2+} → Zn2+^{2+} + Cu, so n = 2

To find: EcellE_{cell}

Formula: Ecell=Ecell∘−0.05912log⁡[Zn2+][Cu2+]E_{cell} = E^\circ_{cell} - \frac{0.0591}{2}\log\frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]}

Substitution: 0.0010.1=10−2\frac{0.001}{0.1} = 10^{-2}, so Ecell=1.10−0.02955×(−2)=1.10+0.0591E_{cell} = 1.10 - 0.02955 \times (-2) = 1.10 + 0.0591

Answer: emf of the cell = 1.159 V

Marks: formula 1, substitution 1, answer with unit 1.

Question 46: The half-life of a first order reaction is 30 min. Calculate the time needed for 90% of the reaction to be completed.

Answer.

Given: t1/2t_{1/2} = 30 min; taking [R]0[R]_0 = 100, after 90% reaction [R][R] = 10

To find: Time for 90% completion, t

Formulae: k=0.693t1/2k = \frac{0.693}{t_{1/2}} and t=2.303klog⁡[R]0[R]t = \frac{2.303}{k}\log\frac{[\text{R}]_0}{[\text{R}]}

Solution: k=0.69330k = \frac{0.693}{30} = 0.0231 min−1^{-1}, so t=2.3030.0231log⁡10010=99.7×1t = \frac{2.303}{0.0231}\log\frac{100}{10} = 99.7 \times 1

Answer: Time for 90% completion = 99.7 min (about 100 min)

Marks: k 1, substitution 1, answer with unit 1.