BODMAS the way SSC uses it
Every question in this chapter ends in a sum, and every sum follows the same order.
The order of work
- Brackets first.
- Then × and ÷, worked from left to right.
- Then + and −, worked from left to right.
× and ÷ are partners, so take them in the order they stand. 80 ÷ 4 × 2 is 20 × 2 = 40, not 80 ÷ 8 = 10. Doing each division first gives the same result as going left to right, so "division first" is a safe habit.
- and − are partners too, and this is where many marks slip away. 90 − 30 + 10 means 90 − 30 = 60, then 60 + 10 = 70. Adding 30 and 10 first gives 90 − 40 = 50, which is wrong. No rule puts addition before subtraction. Read the line from the left.
The opposite slip is to drop BODMAS altogether and work straight across. 90 + 10 × 3 is 90 + 30 = 120. Going left to right gives 100 × 3 = 300, which is also wrong.
A safe routine: find each run of × and ÷, work it out, and write the result in its place. What is left is a plain line of + and −, which you read from the left.
For example: 40 + 36 ÷ 4 × 3 − 9. The run 36 ÷ 4 × 3 is 9 × 3 = 27, so the line becomes 40 + 27 − 9. Then 40 + 27 = 67 and 67 − 9 = 58.
Reading substitutions and interchanges
'+' means '×'. Wherever you see + in the line, you do ×. The sign before the word "means" is the one printed in the question, and the sign after it is the job it does. Rewrite the whole line with the new signs first, then work it out. Changing signs in your head as you go is how one sign ends up changed twice.
For example: if '+' means '×' and '×' means '−', then 90 + 2 × 5 becomes 90 × 2 − 5 = 180 − 5 = 175.
The same reading works for every wording:
- '+' means 'subtraction': the word names the job, so + becomes −.
- Letters or symbols (A means '+', '@' means '÷'): put the real sign in place of each one.
- '×' is replaced by '÷': where you see ×, write ÷. A sign that "remains unchanged" stays as it is.
Sign interchange. "'+' and '−' are interchanged" works both ways: every + becomes − and every − becomes +. It changes every copy, so if × appears twice in the line, both copies change.
Number interchange. Swap whole numbers, never digits, wherever they stand, on either side of '='. If 5 and 9 are swapped, numbers like 15 and 59 stay exactly as they are.
Both together. Make both swaps on the line before you work anything out. Doing only one of them is an easy way to pick a wrong option.
After any swap, start the working again from the left with BODMAS. Do not try to adjust the old answer.
The method for each type
Symbol Substitution. Rewrite the line with the real signs, then work it out with BODMAS. If your answer is not among the options, check the direction of each substitution before redoing the sum.
Sign Interchange. Swap the option's two signs everywhere they appear, work out the left side and compare it with the right. A division that cannot come out whole as printed often tells you which sign has to move.
Number Interchange. The same idea with numbers. A division like 90 ÷ 8 that will not come out exact often points to one of the two numbers.
Sign and Number Interchange. Make both swaps, then work out the line. In the "values of equations (I) and (II)" form, do both swaps on each line on its own and work out two answers.
Correct Equation. Apply the given swap to every option and test each one. An equation that is already true as printed proves nothing, because only the swapped version counts. In the "will be not correct" form, exactly one option fails after the swap.
Filling Signs. Put each option's signs into the gaps in order and test with BODMAS. When '=' is one of the signs, work out both sides. Start with the options that make a division come out exact.
Symbol Rule. With a stated rule such as a @ b = a² + b − 1, put the first number in for a and the second for b. With examples, try a × b, a + b, squares and digit-joining, and check your rule on every example before you use it.
Coded Inequality. Turn every code into >, < or =, write the letters in one chain, and accept a conclusion only if it holds in every arrangement that fits the statements. Two letters that are both bigger than a third have no fixed order between them.
Traps and time targets
Common mistakes
- Addition before subtraction. 90 − 20 + 5 is 70 + 5 = 75, not 90 − 25 = 65.
- No BODMAS at all. Working the whole line from left to right gives a wrong value, and that value may well be among the options.
- A substitution read backwards. '+' means '×' turns a printed + into ×, not the other way round.
- One copy changed. In an interchange, a sign that appears twice changes in both places.
- One swap made. With two signs and two numbers, both swaps must be done.
- Digits instead of numbers. Swapping 3 and 7 leaves 37 and 13 alone.
- True before the swap. In a correct-equation question, an equation that already balances as printed is there to tempt you. Test it after the swap like the others.
- A fill that works left to right. An option can balance only when you ignore BODMAS. It is still wrong.
Time targets
- a substitution question: about 30–40 seconds
- a sign or number interchange: about 40–50 seconds
- a fill-the-signs or correct-equation question: about 45–60 seconds
- a symbol-rule or coded-inequality question: about 30–45 seconds
The Tier 1 Reasoning section has 25 questions on its own locked 15-minute clock, an average of 36 seconds a question. A substitution done in 30 seconds buys time for a fill question that needs most of a minute. If an interchange has taken 50 seconds and nothing balances, mark it and come back later.
[SSC Tip] Write the rewritten line on your rough sheet every time, even for a short substitution. It takes five seconds and stops you from changing a sign twice.