How Part A MCQs Are Marked

Questions 1–15 carry 1 mark each, with no choice. Two rules decide the mark:

  • The schemes accept the option letter, the answer, or both: "b) vinegar", "vinegar" or "b)". Write both, so an unclear letter can't cost you.
  • Only the first attempted answer is considered. Decide before you write; if you cross out an answer and write another, the new one won't be marked.

The 150 MCQs in the last ten papers came in five kinds:

Kind How often What to do
Direct recall Most questions Answer, then check no other option fits better
Two statements 1 or 2 per paper Mark each statement T or F on its own
Match the following About 1 per paper Fix the pair you're surest of; strike out options without it
Data or graph About 1 per paper Work it out in rough (2–3 minutes)
"Incorrect statement" Now and then Underline "incorrect" or "not"; you want the false one

Traps That Cost Marks

  • Statement pairs: both can be true even if one doesn't explain the other. Judge only whether each one is true.
  • Look-alike options: Cu2_2Cl2_2 and CuCl2_2, sp3^3d2^2 and d2^2sp3^3. Read every character.
  • Units: k is mol L−1^{-1} s−1^{-1} for zero order and s−1^{-1} for first order; molar conductivity is S cm2^2 mol−1^{-1}.
  • Orders: many wrong options are the right order written backwards.
  • Data questions: compare two rows where only one concentration changes.

Timing: about 20 minutes for Part A. Do the recall questions first, then the data and match questions.

Worked Examples by Type

In Part A you write only the option and the answer. The "Why" line is for you to understand it, not to write in the exam.

Question 1 (two statements): Statement I: The molality of a solution doesn't change with temperature. Statement II: Molality is defined using the volume of the solvent.

Answer. Statement I is true, but Statement II is false.

Why: Molality is calculated from masses, which don't change with temperature, so Statement I is true. Molality uses the mass of the solvent in kg, not its volume, so Statement II is false.

Question 2 (two statements): Statement I: Mn2_2O7_7 is an acidic oxide. Statement II: Oxides of transition metals in high oxidation states are covalent.

Answer. Both Statement I and Statement II are true.

Why: Mn is in the +7 state in Mn2_2O7_7. Oxides of transition metals in high oxidation states are covalent and acidic. (Mn2_2O7_7 is a green oil.)

Question 3 (match): Match the reactions with their reagents: (i) Etard, (ii) Rosenmund, (iii) Clemmensen, (iv) HVZ with (A) Zn–Hg and conc. HCl, (B) CrO2_2Cl2_2, (C) Cl2_2 and red P, (D) H2_2 with Pd–BaSO4_4.

Answer. i-B, ii-D, iii-A, iv-C

Why: Etard uses chromyl chloride, Rosenmund uses H2_2 over Pd–BaSO4_4, Clemmensen uses Zn–Hg and conc. HCl, and HVZ uses Cl2_2 with red phosphorus. Start with the pair you are surest of (Etard: chromyl chloride) and strike out every option that doesn't have i-B.

Question 4 (match): Match the vitamins (i) B1_1, (ii) C, (iii) A, (iv) K with (A) night blindness, (B) increased blood clotting time, (C) beri-beri, (D) scurvy.

Answer. i-C, ii-D, iii-A, iv-B

Why: Lack of vitamin B1_1 causes beri-beri, vitamin C causes scurvy, vitamin A causes night blindness, and vitamin K causes increased blood clotting time.

Question 5 (data): For A + B → products: doubling [A] doubles the rate; doubling [B] leaves the rate unchanged. Pick the rate law.

Answer. Rate = k[A]

Why: The rate doubles when [A] doubles, so the order with respect to A is 1. The rate doesn't change when [B] changes, so the order with respect to B is 0.

Question 6 (graph): For a reaction, a plot of log [R] against time is a straight line with a negative slope. What is the order?

Answer. First order

Why: For a first order reaction, log⁡[R]=log⁡[R]0−kt2.303\log[R] = \log[R]_0 - \frac{kt}{2.303}. So a plot of log [R] against t is a straight line with slope −k/2.303-k/2.303. For a zero order reaction, it is [R] itself (not log [R]) that gives a straight line.

Question 7 (incorrect statement): Which statement about SN2 reactions is incorrect? (a) They happen in one step. (b) The rate depends on both the substrate and the nucleophile. (c) Tertiary halides react fastest. (d) The product has an inverted configuration.

Answer. (c) Tertiary halides react fastest.

Why: In SN2, the nucleophile attacks from the back side, so bulky groups slow it down. The order of reactivity is CH3_3X > 1° > 2° > 3°, so tertiary halides react slowest.

Question 8 (order): Arrange in increasing boiling point: propan-1-ol, n-butane, propanal, methoxyethane. (All have similar molar masses.)

Answer. n-butane < methoxyethane < propanal < propan-1-ol

Why: n-Butane has only weak van der Waals forces. Methoxyethane is slightly polar. Propanal has strong dipole–dipole attraction. Propan-1-ol forms hydrogen bonds, so it has the highest boiling point.

Question 9 (order): Arrange in increasing acid strength: acetic acid, chloroacetic acid, phenol, ethanol.

Answer. ethanol < phenol < acetic acid < chloroacetic acid

Why: The phenoxide ion is stabilised by resonance, so phenol is more acidic than ethanol. The carboxylate ion is stabilised even more, so acetic acid is more acidic than phenol. In chloroacetic acid, Cl pulls electrons away and stabilises the carboxylate ion further.

Question 10 (one-step calculation): What is the spin-only magnetic moment of Ti3+^{3+}? (Ti = 22)

Answer. 1.73 BM

Why: Ti3+^{3+} is 3d1^1, so n = 1. μ=n(n+2)=1×3=3\mu = \sqrt{n(n+2)} = \sqrt{1 \times 3} = \sqrt{3} = 1.73 BM.